Our Products

PFA LINED GLOBE 2 WAY CONTROL VALVE SERIES 2201

The PFA PTFE lined globe control valve is produced by high temperature molding lined fluoroplastic process in the valve body wall and the valve trim.It can completely cut off the contact between the corrosive medium and the valve body, then it enhances the service life of valve. The PFA PTFE lined control valve is widely used for acid, alkali, salt and other strong corrosive medium, also used for gas and liquid medium that are easily volatilize and penetrate.

Design Features

APCON PFA lined globe valve offers superior solution for addressing aggressive or corrosive media especially in the chemical industry.
Low cost alternative to exotic material required to handle aggressive or corrosive media
Exchangeable PTFE seat and PTFE plug
Stem sealed by PTFE bellow with an additional safety packing as secondary seal
Test connection for monitoring of the bellow primary seal and detecting leakage
Low permissibility with a standard PFA liner thickness of 3+ mm

Get a Custom Solution Quote

Tell us your requirements. Our engineers will design it for you.

Technical Specification

Valve Sizes	DN 25 to DN 100
Nominal Pressure	PN 10 / 16 Flanges, ANSI Class 150
Temperature Range	-10 to 200°C
Characteristic	Equal Percentage / Linear
Leakage Rate	Leakage rate A according to DIN EN 12266-1, P12 Leakage rate 1 BO according to DIN 3230 Part 3
Plug Stem Sealing	PTFE bellows with backup packing and test connection
Rangeability	20:1 (to kvs 0.1) / 50:1 (from kvs 0.25)
End Connections	As per DIN EN 1092-2, Form B and ANSI 150 lbs
Body	EN-JS 1049 (ASTM A395) with PFA lining
Bonnet Flange	EN-JS 1049 (ASTM A395)
Valve Plug & Seat	PTFE
Bellows	PTFE

LEADING INDUSTRIAL SOLUTIONS PROVIDER

How to Contact Us

Request an Industrial Solution Quote

Share your project scope with us. Our technical experts will review your enquiry and get back within 24 hours to assist with custom-engineered solutions.